DESCRIPTION
This is the SainSmart 7-inch TFT LCD module with a TFT LCD shield kit for Arduino enthusiasts. It includes one 7-inch TFT LCD display and a TFT LCD shield for Arduino Due. We will provide you with the complete documentation, including an example project for Arduino Due, along with technical support after your purchase.
SainSmart 7-inch TFT LCD 480X800 Arduino Due MEGA2560 R3
This module is 100% compatible with standard MCUs like ARM, AVR, PIC, and 8051, especially within the Arduino family, such as Arduino Due and Arduino MEGA2560 (R3). The module uses the SSD1963 LCD controller chip, which includes a 5-inch LCD with touchscreen functionality.
Note: The LCD is covered by a protective film. If you do not need it, you can remove the protective layer.
SPECIFICATION
- 7.0" TFT LCD Module, Resolution 800x480, SSD1963 Controller
- Onboard 64Mbit SPI Flash for storing fonts of 10 sizes and 236 icons for custom application development
- Write images/icons to flash memory via SD card with zero programming
- 64Mbit can store 1800 42x42 pixel icons/images
- LCD Type: TFT Transmissive Normal White
- Interface: 8/16-bit parallel bus interface
- PCB Color: Blue
- Onboard 400mA DC-DC Boost regulator for LCD backlight power supply
- LCD-specific initialization code is provided to optimize power control registers and gamma curves for the best display performance. We have tested the provided code, which delivers optimal display performance.
- Module dimensions: 186mm x 106mm x 23mm (including pin header extrusion)
- Active Area: 154mm x 86mm
- Pixel pitch: 0.179mm x 0.179mm
- Standard 2x20 2.54mm pin header for connection to MCU/development board
- Module weight: 410 grams
SainSmart TFT LCD Extend Shield for Arduino Due with 7-inch TFT LCD
This is the SainSmart TFT LCD Extend Shield for Arduino Due. Using this shield eliminates the hassle of using other cables; simply plug the module into Arduino Due through this shield.
The TFT LCD Shield is 100% compatible with Arduino Due and fits two types of TFT LCD modules:
- 40-pin version LCD, commonly used in previous versions of the TFT shield for Arduino Due 7-inch LCD display.
- 32-pin version LCD, commonly used in STM32 development boards (unsoldered).
The shield defines that all data transmit ports are PC1-PC8 and PC12-PC19, while the control pins are PD0-PD3. This perfect design allows for high-speed data transmission. The SPI interface is designed in the ISP header of Arduino Due, enabling high-speed SPI transfer with DMA without delay.
WHAT'S IN THE PACKAGE
- 1x SainSmart 7" TFT LCD Display
- 1x SainSmart TFT LCD Adjustable Shield
Note:
- We have confirmed that the LCD is 100% compatible with Raspberry Pi, but we do not have a programmed project available yet.
- This shield is specifically for Arduino Due. If you need an LCD Extend Shield for Arduino MEGA2560 (R3), you will need a similar shield available in our webstore.
- This shield is specifically for the 7-inch TFT LCD. If you need an LCD Extend Shield for 3.2" or 5", you will need a similar shield, also available in our store.
- The 7-inch TFT LCD is 100% compatible with Arduino Due, MEGA2560 (R3), and Raspberry Pi.